Valve Adapter Standard Schrader Conventional Air Pump Converter Paddleboard Pump Attachment Air Pump Adapter Inflatables

Description

Valve Adapter Standard Schrader Conventional Air Pump Converter Paddleboard Pump Attachment Air Pump Adapter Inflatables

This fits your .

Make sure this fits by entering your model number.

【Premium Material】This Stand-Up Paddleboard Accessories Is Made of High Quality Copper And Rubber Material, Which Is Sturdy and Durable, High-Strength and Wear-Resistance, Saving Labor, Resistant High Pressure, Strong Seal Leak Protection,Air Pump Adapter For Inflatables.

【Lightweight & Portable】The Sup Valve Adapter Adopt Fine Workmanship And Delicate Design, Convenient To Use.

The Air Compressor Adapter Hooks Up Easily And Air Does Not Leak From It.

Lightweight and Portable, Individual Sealed Package, Easy to Use and Carry.

You Can Use It Anywhere.

【Easy to Use】Remove Your Sup Valve Cap On the Fitting, And Ensure That The Valve Is Sealed For Inflation By Rotating The Central Pin Into The Outer/Closed Position.

Insert The Valve Adapter Into The Sup Valve The Same Way As You Would Insert The Pump Hose Nozzle.

Connect Any Standard Schrader Pump To The Valve Adapter Fitting To Inflate Your Board.

Monitor Board Pressure Frequently While Inflating! 【Widely Applications】Our Inflatable Product Adapter – Utilizes a Standard Schrader Valve Allows Inflation Tubes to Be Directly Connected to the Air Compressor, Bike or Tire Pump.

It Works On The Majority of Inflatable Stand Up Boards.

It Is Also Suitable for Boats And Kayaks Which Also Use the Halkey-Roberts Valve for Inflation.

Use Your Compressor or Tire Pump to Easily Reach 20 Psi.

Be Very Careful Not to Over Inflate Your Board or Craft, And Check the Board’s Pressure Frequently.

【Recommendations】: This Is an Adaptor Only.

The Speed at Which Your Board Inflates Will Depend on the Pump Used.

The Larger the Inflation Pump You Use, The Faster the Inflation.

Because the Compressors/Tire Pumps Take Time to Inflate, It Is Recommended to Inflate The Board By Hand Hand Pump Until It Becomes Difficult to Pump, And Then Use The Paddle Board Air Pump Adapter to Top Off The Pressure.